HFS clamping systems

Based on the gripping system, there are two types of Head Fitting Systems which are provided by KiaCuttingTools Company for the market; axial and radial clamping systems. The selection between them must be carried out in accordance with the machining circumstances.
HFS axial clamping system
The axial type is operated either from front or the rear side through the shank, depending on the tool condition and which one is more accessible. By means of tightening and loosening the differential screws which are embedded in tool head, the tool head gets installed and released from the shank.

HFS1


HFS radial clamping system
The radial type is developed and manufactured to cut down the required time to changeover the tool. In fact, turning the designed eccentric pin on the shank causes the pull stud to get clamped  or released.

HFS2


1